Samsung AR24TSFABWKN User Manual

AIR CONDITIONER CONTENTS
MULTI AIR CONDITIONER
1. Precautions
2. Product Specifications
3. Disassembly and Reassembly
4. Troubleshooting
5. PCB Diagram
6. Wiring Diagram
7. Reference Sheet
INDOOR UNIT OUTDOOR UNIT
AR07/09/12/15/18/24TSFABWKN
AR07/09/12/15/18/24BSFCMWKN
AC009/012/018BNNDCH
AC009/012/018BNLDCH
AJ009/012/015/018BNHDCH
AC009/012BN1DCH
AC009/012/015/018BNJDCH
AC012/018/024BNZDCH
AJ020BXJ2CH
AJ024BXJ3CH
AJ036BXJ4CH
AJ048BXJ5CH
AJ020BXS3CH
AJ024BXS4CH
AJ030BXS4CH
AJ036BXS4CH

Samsung AR24TSFABWKN Specifications

General

Compressor Type	Rotary
Refrigerant	R32
Power Source	220-240V, 50Hz
Energy Efficiency Ratio (EER)	3.5
Air Flow Rate	1200 m³/h

Summary

Precautions

1-1 Precautions for the Service

General safety guidelines for service personnel.

1-2 Precautions for the Static Electricity and PL

Safety guidelines regarding static electricity and product liability.

1-3 During operation

1-5 Precautions for the Pump Down

Product Specifications

2-2 Product Specifications

Detailed technical specifications for indoor and outdoor units.

2-3 The Comparative Specifications of Product

2-4 Combination Table (Outdoor-Indoor)

Disassembly and Reassembly

3-1 Outdoor Unit

Step-by-step guide for disassembling the outdoor unit.

Troubleshooting

4-1 Display and Check Method

Methods for diagnosing issues based on error codes and displays.

4-2 Setting an indoor unit address and installation option

Procedures for setting indoor unit addresses and installation options.

4-3 Setting Option

Guide to configuring various operational options for the unit.

4-4 Items to be checked first

Initial checks for common operational issues before detailed troubleshooting.

4-5 Setting to Cool or Heat only mode, checking and Cool/Heat modes operation test

4-6 Fault Diagnosis by Symptom

Diagnosing problems based on observed symptoms.

Reference Sheet

7-2 Connecting Up and Purging the Circuit

Procedures for connecting and purging refrigerant lines.

7-3 Refrigerant Refill

7-4 Refrigerant Adjustment

7-6 "Pump down" Procedure