To Next PageTo Next Page
Need help?Do you have a question about the Samsung AR24TSFYBWKNCV and is the answer not in the manual?
General| Refrigerant | R32 |
|---|---|
| Compressor Type | Rotary |
| Outdoor Unit Net Dimension (WxHxD) | 880 x 638 x 310 mm |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.21 |
| Noise Level (Outdoor, High) | 55 dBA |
| Noise Level (Outdoor) | 55 dBA |
| Filter | Yes |
| Smart Features | Wi-Fi Control |
Provides essential safety instructions for installing the air conditioner correctly.
Details safe electrical connections, circuit breaker requirements, and power supply guidelines.
Outlines safe operation practices, including maintenance and usage advice.
Provides guidance on the environmentally sound disposal of the air conditioner unit.
Covers miscellaneous safety advice, including child supervision and current measurement standards.
Describes the key features and benefits of the air conditioner, such as cooling modes and installation ease.
Presents detailed technical specifications, performance ratings, and operational parameters.
Compares the specifications and features across different air conditioner model variants.
Lists and describes the specifications of included accessories and available optional components.
Explains how to access and utilize the unit's diagnostic test mode for operational checks.
Details common error codes displayed on the unit and methods for checking and resolving them.
Provides a step-by-step guide to setting various operational options and configurations using the remote control.
Detailed procedures for the safe disassembly of the indoor unit's components.
Specific steps for disassembling the outdoor unit model N-SI.
Specific steps for disassembling the outdoor unit model Q.
Specific steps for disassembling the outdoor unit model P.
Specific steps for disassembling the outdoor unit model UB.
Lists and identifies all assembly parts and their codes for the indoor unit.
Lists and identifies all assembly parts and their codes for the outdoor unit.
Presents the detailed electrical wiring diagram for the indoor unit's components.
Presents the detailed electrical wiring diagram for the outdoor unit's components.
Illustrates the layout and connections of the indoor unit's main PCB.
Shows the components and connections on the outdoor unit's inverter PCB.
Details the layout and connectors of the display unit's PCB.
Provides instructions on correctly connecting wires to the indoor unit's terminal blocks.
Identifies and describes the main parts of both the indoor and outdoor units.
Explains the buttons, functions, and display indicators of the wireless remote control.
Lists initial checks and essential preliminary steps for troubleshooting unit issues.
Guides on diagnosing and resolving communication errors between indoor and outdoor units.
Troubleshooting procedure for errors related to the indoor unit's temperature sensor.
Steps to diagnose and fix errors related to the indoor fan motor speed detection.
Troubleshooting procedure for errors related to the outdoor unit's temperature sensor.
Guides on diagnosing and resolving errors with the outdoor condenser temperature sensor.
Troubleshooting steps for errors related to the outdoor discharge temperature sensor.
Guidance on resolving errors caused by abnormal operating conditions or environmental factors.
Steps to diagnose and fix errors related to EEPROM data and OTP (One Time Programmable) settings.
Troubleshooting procedure for errors specific to the outdoor unit's fan motor.
Guidance on diagnosing and resolving issues preventing the compressor from starting.
Troubleshooting steps for compressor wire connection problems and rotation errors.
Steps to diagnose and resolve errors related to current sensors and input current.
Guidance on troubleshooting and resolving over-current protection (O.C.) errors.
Troubleshooting procedure for diagnosing and fixing the 'no power' issue in the outdoor unit.
Steps to resolve issues where the louver motor fails to operate correctly.
Procedure for diagnosing why the remote control is not communicating with the unit.
Guidance on troubleshooting and resolving errors encountered during the Smart Install process.
Troubleshooting steps for Over Load Protection (OLP) over-temperature errors in inverter models.
Illustrates the functional blocks and signal flow within the indoor unit.
Presents the functional blocks and signal pathways of the outdoor unit.
Key safety notices and preliminary checks before performing PCB inspections.
General guidelines and steps for inspecting the unit's printed circuit boards.
Detailed inspection procedures for the indoor unit's main and display PCBs.
Detailed inspection procedures for the outdoor unit's PCBs and associated components.
Provides a chart correlating refrigerant pressure with indoor and outdoor temperatures.
Table showing pressure and capacity data for various operating conditions.
Answers common questions and provides solutions for non-trouble related issues.
Guides on how to clean the unit's filters and internal/external parts.
Provides essential guidelines and procedures for the correct installation of the unit.
Visual diagrams illustrating key steps in the installation process for indoor and outdoor units.
An index referencing model names, series, projects, and their corresponding codes.
