Samsung AS24A2RCD - Page 11

11
No. Part Procedure Remark
Fan and Motor
Heat Exchanger
and compressor
2
3
7) Loosen the fixing screws and separate
the cabinet side.
[US24A1(2)RC]
Loosen the fixing screws and separate
the cabinet side LF and RH.
[US24A1(2)RCD]
1) Loosen the fixing bolt and separate
the fan.
2) Loosen four fixing bolts to separate
the motor.
1) Release the refrigerant at first.
2) Disassemble the inlet and outlet pipe
by welding.
3) Loosen the fixing screws of the heat
exchanger.
4) Separate the heat exchanger.
5) Loosen four bolts of the compressor.
6) Separate the compressor.
AS18A9(0)RCF SM_E_15775 3/10/05 7:15 PM Page 11