Samsung AS24A2RCD - Page 9

9
No. Part Procedure Remark
Fan and Motor
2
3
8) Loosen the fixing screws and separate
the cabinet side.
[US18A9(0)RCF]
Loosen the fixing screws and separate
the cabinet side LF and RH.
[US18A9(0)RCFD]
1) Remove the nut flange
(Turn to the clockwise).
2) Separate the fan.
3) Loosen four screws to separate
the motor.
1) Release the refrigerant at first.
2) Disassemble the inlet and outlet
pipe by welding.
3) Loosen the fixing screws of the heat
exchanger.
4) Separate the heat exchanger.
5) Loosen three bolts of the compressor.
6) Separate the compressor.
Heat Exchanger
and compressor
AS18A9(0)RCF SM_E_15775 3/10/05 7:15 PM Page 9