Adjusting the Air Flow Direction Horizontally
If the air conditioner is used at... Then...
Higher temperature The automatic protection feature may be triggered
and the air conditioner stopped.
Lower temperature A water leakage or some other malfunction may happen
if the heat exchanger freezes.
Higher humidity levels Water may condense on and drip from the surface of the unit
if it is used for long periods.
The following table indicates the temperature and humidity ranges
within which the air conditioner can be used.
Mode Indoor
Temperature
Outdoor
Temperature
Indoor Humidity
Cooling 21°C to 32°C approx. 21°C to 43°C approx. 80% or less
Temperature and Humidity Ranges
E-6
Depending on the position of the unit in your room, you can adjust the
orientation of the inner air flow blades on the right-hand side of the unit,
thus increasing the efficiency of the air conditioner.
1
Hold the inner air flow blades, and adjust them to the desired direction.
Power Failure
If a power failure occurs, set the operating mode selection dial to the OFF
position. When the power comes back on, wait five minutes before turning
the unit back on.
To Next Page
Loading...
