Solving Common Problems
E-8
EXPLANATION / SOLUTION
◆
Check that the circuit breaker used for the air conditioner
has not been triggered.
◆
Check that the power cable is plugged into a wall socket and the
socket is switched on, if necessary.
◆
Check that the correct operating mode has been selected
(cooling or airing).
◆
Check that the correct operating mode has been selected.
◆
The room temperature may be too low.
◆
Dust may be blocking the air filter;
refer to page 7 for cleaning instructions.
◆
Check that there is no obstacle blocking the air flow into or out of the unit.
PROBLEM
The air conditioner does not
operate at all
The air conditioner does not
cool
◆
Air the room.
Odours are permeated in the
room during air conditioning
Before contacting the after-sales service, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
To Next Page
Loading...
