4-10 Samsung Electronics
Disassembly and Reassembly
No. Part name Procedures Remarks
$
%
Ass'y - Evaporator
Plate - Evap Casing
2. Remove 3 screws on the control box and
2 screws on cover partition.
3. Seperate the terminal cover of
compressor and compressor lead wire,
motor lead wire.
4. Take out the control box forward.
1. Remove for screws on the left and right
side of the evaporator.
1. Lift up the evaporator, and remove the
tray drain.
2. Remove two screws on the left side of the
plate evap casing.
DB68-02476A(4)-1 2/18/03 4:16 PM Page 4-10
To Next Page
Loading...
