Samsung Electronics 4-11
Disassembly and Reassembly
No. Part name Procedures Remarks
^
&
*
Blower
Propeller Fan
Motor Supporter
&
Motor
1. Loosen the nut-washer, and remove the
blower.
1. Remove two screws on the bottom side,
and 5 screws on the case cond.
2. Loosen the hexagon nut, and remove the
fan.
1. Remove four hexagon nuts on the base
pan and partition.
2. Move the motor - assembly toward the
condenser, and lift up the motor -
assembly from the frame.
3. Remove four hexagon nuts on the
supporter-motor.
DB68-02476A(4)-1 2/18/03 4:16 PM Page 4-11
To Next Page
Loading...
