Selecting Sleep Mode
RemoteControl
ControlPanel
The Sleep mode can be used when you are cooling your room to switch
the air conditioner off automatically after 8 hours.
> The Sleep function can be set whether the air conditioner is
switched on or off, and this function can be selected for any mode.
Press the _ button on the remote control
or
press the _ button on the unit.
Result: • Each time you press a button, the unit beeps.
• The _# indicator and "El "wilt be displayed.
• The remaining time is decreased and displayed in 1 hour
segments.
• If Sleep is selected after switching on the unit, the air conditioner
will run in Cool mode. During this period, the temperature
displayed is the one you set for the Cool mode. If Sleep is
selected before switching on the unit, the air conditioner starts
runs in Cool mode and the temperature is set to 79°F.
• The fan runs in tow mode (F1), and you can adjust the
speed.
the Sleep Mode
ff you no longer wish to use the Sleep mode that you have set, you can
cancel it at any time.
Press the Q button on the remote
1 control
or
press the (_ button on the unit
to switch off the air conditioner.
To cancel the selected Sleep mode, you can also press the _, _,
_, _ or _ button on the remote control
or
press the _, _, _ or _ button on the unit.
Result: • The unit beeps.
• The.*# indicator is no longer displayed.
• The air conditioner operates in the last selected mode.
If you select the Energy Saving mode in the Sleep mode, the Sleep
mode will be cancelled and the air conditioner will start up in the
Energy Saving mode.
@
To Next Page
Loading...
