!TTING STARTED
I Preparation for Installation
_1,Always have an assistant to help you, Never attempt to install
any air conditioner alone.
_1,You risk the possibility of hurting yourself or injuring others by
attempting to install it alone,
I Checkpoints Prior to Installation
1 Carefully remove the unit from the packing case, lay it on
the floor and check that all accessories (as indicated) are enclosed.
2 Check the cabinet and front grille of the unit for any defects such as
scratches.
3 Be sure to check the power supply.
Refer to the specifications on the label attached to the unit.
O
I Installation Conditions
1 Electrical Requirements
For personal safety:
• This appliance must be properly grounded,
• Do not, under any circumstances, cut or remove the third grounding
prong from the power cord,
• We recommend that you do not use an extension cord or an
adapter plug with this appliance,
• Do not change the plug on the power cord of this appliance,
• Follow national electrical codes or local codes and ordinances,
115V 230-208V 230-208V 230-208V
15 AMP circuit 20 AMP circuit 15 AMP circuit 30 AMP circuit
"parallel" type "perpendicular" type "tandem" type "tandem" type
• If the electric supply provided does not meet the above
specifications, call a licensed electrician.
• Aluminum house wiring may pose special problems -
consult a qualified electrician.
• This unit requires a separate circuit, serving only this appliance.
To Next Page
Loading...
