E-19
Selecting Energy Saving Mode
To select the energy saving mode, press the button on the remote
control one or more times until the Energy Saving indicator lights up.
Result
:
◆
The E-saver indicator lights up on the control panel.
◆
The fan and compressor cycle on and off together.
◆
The fan will continue to run for a short time after the
compressor cycles off.
➢
If you would like the air conditioner to run in Fan mode, do not press
the button. You cannot use the Fan mode in the Energy Saving
mode.
To stop the energy saving mode, press the button on the remote
control again.
Result: The fan runs at all times, while the compressor cycles on and off.
➢
If you select the Sleep Timer in the Energy Saving mode, the Energy
Saving will be cancelled and the air conditioner will start up in the
Sleep Timer mode.
If you wish to save energy when using your air conditioner,
select the energy saving mode.
1
2
Remote Control
Control Panel
To Next Page
Loading...