What does 'Not Supported Mode' mean on Samsung LCD TV?
If your Samsung LCD TV shows 'Not Supported Mode', check the maximum resolution and the connected device’s Video frequency. Compare these values with the data in the Display Modes.
Why is closed captioning not working on my Samsung BN68-01797A-00?
If Closed Captioning is not working on your Samsung LCD TV, and you are using a Cable/Satellite box, you must set Closed Captioning on the box, not your TV.
Why does my Samsung BN68-01797A-00 LCD TV say 'Resets all settings'?
If the “Resets all settings to the default values” message appears on your Samsung LCD TV, this appears when you press and hold the EXIT button for a while.
Why is the picture distorted in the corner of my Samsung BN68-01797A-00?
If the picture appears distorted in the corner of the screen on your Samsung LCD TV, it may be because 'Just Scan' is selected with some external devices.
How to fix flickering vertical bars on Samsung LCD TV?
If you see vertical bars that appear to flicker, jitter, or shimmer on the image of your Samsung LCD TV, adjust the Coarse tuning and then adjust the Fine tuning.
How to fix flickering horizontal bars on Samsung LCD TV?
If you see horizontal bars that appear to flicker, jitter, or shimmer on the image of your Samsung LCD TV, adjust the Coarse tuning and then adjust the Fine tuning.
How to center image on Samsung BN68-01797A-00 screen?
If the image is not centered on the screen of your Samsung LCD TV, adjust the horizontal and vertical position. The screen position must be adjusted on the output source (i.e., STB) with a digital signal.
How to stabilize image on Samsung BN68-01797A-00 LCD TV connected to PC?
If the image is not stable and may appear to vibrate when you have a computer connected to the PC input on your Samsung LCD TV, use your computer utility program to change the display settings if the setting is not correct.
What to do if my Samsung BN68-01797A-00 operates erratically?
If your Samsung LCD TV operates erratically, unplug the TV for 30 seconds, then try operating it again.
What to do if my Samsung LCD TV has no picture or sound?
If your Samsung LCD TV shows no picture or sound, try the following: * Try another channel. * Press the SOURCE button. * Ensure the TV is properly plugged into a working outlet. * Check the antenna connections.
Explains the function of each button on the remote control, from POWER to color buttons.
Instructions on how to change channels using the channel buttons or number buttons.
Controls for adjusting the TV's sound level and temporarily silencing the audio.
How to select picture modes like Dynamic, Standard, or Movie for optimal viewing.
Adjusting brightness, contrast, sharpness, color, and tint for desired picture quality.
Activating and adjusting picture options like Digital NR, HDMI Black Level, and Film Mode.
Changing the image aspect ratio to fit the screen, with options like 16:9, Zoom, and Just Scan.
Selecting sound modes like Standard, Music, Movie, Speech, or Custom for desired audio.
Adjusting sound settings, including equalizer and L/R balance, for personal preference.
Filtering out scrambled digital channels after the auto program process is complete.
Setting up your PC software and display settings for optimal TV connection.
Using the Auto Adjust function to automatically tune PC signal frequency and position.
Removing picture noise and adjusting vertical frequency for a clearer PC display.
Adjusting the horizontal and vertical position of the PC screen image on the TV.
Setting restrictions based on age categories (TV-Y to TV-MA) and sub-ratings (FV, D, L, S, V).
Applying parental controls based on movie ratings (G, PG, PG-13, R, NC-17, X, NR).
Solutions for common TV problems like poor picture, no sound, remote issues, and screen distortions.
To Next Page
General