13
Changing Brightness, Contrast and Sharpness settings
You can adjust
Brightness, Contrast or Sharpness by moving the JOG button up or down, if no OSD menu
is displayed.
Brightness
Contrast
Sharpness
100
―
The displayed image may differ depending on the model.
Brightness
―
This menu is not available when
Eco Saving Plus is enabled.
―
This menu is not available when Eye Saver Mode is enabled.
Changing the Volume setting
You can adjust
Volume by moving the JOG button left or right, if no OSD menu is displayed.
Volume
50
Mute
―
The displayed image may differ depending on the model.
―
If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute the
sound or cause choppy audio when applying the headphones or speakers. Set the input volume for the input
device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on the
product.
―
What is Auto Mute?
The function mutes the audio to improve sound effect when there is sound noise or when the input signal
is weak, usually due to a problem with the volume of an input device.
―
To activate the
Mute function, access the Volume control screen, then use the JOG button to move the focus
down.
To deactivate the
Mute function, access the Volume control screen, then increase or decrease the Volume.
To Next Page
Loading...
