Samsung C34F791WQ - Connection Using an HDMI-DVI Cable; Connection Using an DP Cable; Connecting to Headphones; Connecting the Power

20
Connection Using an HDMI-DVI Cable
HDMI IN 1, HDMI IN 2
―
The audio function is not supported if the source device is connected using the HDMI-DVI cable.
―
The optimum resolution may not be available with an HDMI-DVI cable.
Connection Using an DP Cable
DP IN
―
A DP cable shorter under 2 m in length is recommended. Using a cable longer than 2 m can affect the picture
quality.
―
To display 3440 x 1440 @ 100 Hz, use a DP cable that supports 3440 x 1440 @ 100 Hz. Make sure that the
graphics card of the DP source supports 3440 x 1440 @ 100 Hz.
Connecting to Headphones
―
Use headphones when activating sound with a HDMI-HDMI or DP cable.
Connecting the Power
2
HDMI IN 1
DC 19V
3
1
1
Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 19V port
on the back of the product.
2
Next, connect the power cable to the power outlet.
3
Press the JOG button on the back of the monitor to turn it on.
―
The input voltage is switched automatically.