35
PBP Mode (available in PBP mode(Size ))
Set the Picture Size for each of the divided screens.
In PC mode
• Auto: Display the picture according to the aspect ratio of the each screen input source.
• Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input source.
In AV mode
• 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and standard
broadcasts.
• 16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
• Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
―
The function may not be supported depending on the ports provided with the product.
―
Changing the screen size is available when the following conditions are satisfied.
―
A digital output device is connected using the HDMI/DP cable.
―
The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can support
all of these signals.).
―
This can only be set when the external input is connected through HDMI/DP and PC/AV Mode is set to AV.
Contrast
PIP Mode (available in PIP mode(Size / / ))
Adjust the contrast level for sub-screen.
PBP Mode (available in PBP mode(Size ))
Adjust the contrast level for each screen.
To Next Page
Loading...
