30
S
AMSUNG ELECTRONICS
GB
Multistage Cooking (CE2733/2733T)
Your microwave oven can be programmed to cook food up to four stages.
Example : You wish to defrost food and cook it without having to reset the
oven after each stage. You can thus defrost and cook a 500g fish
in four stages:
◆
Defrosting
◆
Standing for 20 minutes
◆
Cook I
◆
Cook II
➢
✻
You can set between two and four stages in multistage cooking.
✻
If you set four stages, the first stage must be defrosting and the second stage must be a
standing time.
✻
Don’t press button until you’ve set the final stage.
1 Press the Auto( ) button one or more times.
2 Set the weight by pressing the kg and g buttons the appropriate number
of times (500g in the example).
3 Press the button.
4 Select the standing times by pressing the 10min, 1min and 10s buttons
the appropriate number of times (20 minutes in the example).
6 Set the cooking time by pressing the 10min, 1min and 10s buttons the
appropriate number of times (4 minutes in the example).
5 Press the button.
The microwave mode(I) ;if necessary, set the power level by
pressing the button again one or more
times. (600W in the example)
8 Set the cooking time by pressing the 10min, 1min and 10s buttons the
appropriate number of times (10 minutes in the example).
7 Press the button.
The microwave mode(II) ;if necessary, set the power level by
pressing the button again one or more
times. (450W in the example)
9 Press button.
Result
: The four modes [defrosting, standing time and cooking(I,II)] are
selected one after the other. According to the defrosting mode
that you have chosen, the oven may beep halfway through
defrosting to remind you to turn the food over.
◆ When cooking is over, the oven beeps four times.
◆ The end reminder signal will beep 3 times (once every minute).
◆ The current time is displayed again.
CE2733/2713(GB3) 11/22/99 10:36 PM Page 30
To Next Page
Loading...
