Samsung CKF5607L

This monitor has a built-in power management
system called PowerSaver. This system saves
energy by switching your monitor into a low-
power mode when it has not been used for a
certain amount of time. The available modes are
“On,” “Standby,” “Suspend,” and “Off.”
This system operates with a VESA DPMS
compliant video card installed in your computer.
You use a software utility installed on your
computer to set up this feature. See the table
below for details.
Note 1:This monitor automatically returns to
normal operation when horizontal and
vertical sync return. This occurs when you
move the computer's mouse or press a key
on the keyboard.
Note 2:This monitor is EPA Energy Star
compliant and NUTEK compliant when
used with a computer equipped with
VESA DPMS functionality. If your
computer system cannot support a display
power management function, you can
purchase an optional DPMS software
program to enable the power saving
function. Please contact Samsung or your
dealer for more information.
Note 3:For energy conservation, turn your
monitor OFF when it is not needed, or
when leaving it unattended for long
periods.
Note 4:The PowerSaver functions do not apply to
sound functions and may cause sound
abnormalities during its power saving
modes.
4 Operating Instructions
CKF5607L 4-3
State
Items
Normal
Operation
Horizontal Sync
Vertical Sync
Video
Power
Indicator
Power
Consumption/hr
Active
Active
Active
Green Amber
Amber/Green
Blinking
Amber
Blinking
85 W (max.)
65 W
(nominal)
Less than
15 W
50 W
(nominal)
Less than
5 W
Inactive
Active
Blanked
Active
Inactive
Blanked
Power saving function EPA/NUTEK
Stand By
Mode
Suspend Mode
Position A
Power Off Mode
Position B
Inactive
Inactive
Blanked
4-3 Power Management System
Table 4-2. Display Power Management Signaling (DPMS)