PCB Diagram
Samsung Electronics 9-5
9-3 CRT Board
9-3-1 Assy CRT Board
■ CRT Drive
This supplies the final R/G/B signal from the System Board and the CRT deflection signal to the CRT.
9-3-2 Names & Roles of Key Parts
* CNC01 : The R/G/B signal from the F-BOX Board is connected.
* CNC02 : Power from the MAIN Board to the drive CRT and AMP drive is supplied to this port.
* FN1 : The signal connection port for the Tilt Coil. It is necessary for the screen slant adjustment.
* FV1 : Outputs the VM signal to the CY Ass'y.
To Next Page
Loading...
