4-3-9 RF AGC Adjustment
Set the AGC data to 33 (Factory Mode).
4-3-10 Sub-Color Adjustment
Set data to (Factory Mode).
4-3-11 Geometry Adjustment
SC →VS→VA →VSL→HS
1. Input a lion head pattern.
2. Set the SC (S-Correction) as 29 and VS(Vertical
Shift) 31 so that the lion head circle becomes
oval.
3. Adjust with VA (Vertical Amplitude) so that
the top margin of the picture is 4.
Fig. 4-7
4. Adjust with VSL (Vertical-Slope) so that the
bottom margin of the picture is 4.
Fig. 4-8
5. Adjust with HS (Horizontal Shift) so that the
lion-head pattern and CRT centers are aligned.
Fig. 4-9
6. Adjust EWID (EW Width) so that the left and
right margins of the picture are 5.
7. Input a cross-hatch pattern.
Alignment and Adjustments
Samsung Electronics 4-9
To Next Page
Loading...
