To Next PageTo Next Page
Need help?Do you have a question about the Samsung CL29K5MQKX/XAP and is the answer not in the manual?
Covers safety guidelines and precautions for servicing, including electrical shock and X-rays.
Details precautions specific to the servicing process, emphasizing safety and component handling.
Outlines measures to prevent damage to ESD-sensitive components during servicing.
Provides technical specifications for the color television receiver, including model, system, channels, and picture tube.
Lists integrated circuits used in the TV, their location, specification, description, and remarks.
Illustrates the base diagrams for various semiconductor components like transistors, diodes, and ICs.
Provides instructions for removing the back cover of the television set.
Details the procedure for removing the main circuit board from the TV.
Explains the steps required to remove the speakers from the unit.
Provides instructions and cautions for safely removing the Cathode Ray Tube (CRT).
Covers pre-adjustment procedures, including factory mode and steps after component replacement.
Explains how to enter and navigate the factory/service mode for adjustments.
Lists main adjustment parameters with OSD, function, range, initial data, and selection.
Describes how various settings are selected via the Option Table in Service Mode.
Explains the Reset Mode used for factory inspection, listing resettable functions.
Details the procedure for checking the high voltage level and ensuring it stays within limits.
Describes how to adjust the focus control for a clear picture.
Explains the screen adjustment process using service mode and FBT VR.
Guides on performing purity adjustments for accurate color reproduction.
Details the procedure for adjusting white balance, including set up and light adjustments.
Provides steps for adjusting the center convergence of the picture using magnets.
Explains how to set the AGC data in factory mode.
Details how to set the NSR data in factory mode for sub-color adjustment.
Guides on adjusting picture geometry (SC, VS, VA, VSL, HS).
Details adjustments for EW geometry parameters like Parallelogram, Bow, Width, and Trapezium.
Provides a flowchart for diagnosing and troubleshooting power-related issues in the TV.
Outlines a troubleshooting process for diagnosing no video issues while sound is present.
Details troubleshooting steps for a TV with no sound but video is present.
Provides diagnostic steps for issues causing horizontal lines or screen anomalies.
Presents an exploded view and parts list for the specific model CL29K5MQKX/XAP.
Illustrates the block diagram of the K57A chassis, showing signal flow and component interaction.
Provides the wiring diagram for the K57A chassis, detailing connections between components.
Presents the first part of the main schematic diagram for the television.
Shows the second part of the main schematic diagram, continuing the circuit details.
Displays the third part of the main schematic diagram, completing the circuit overview.
Provides the schematic diagram specifically for the CRT section of the television.
General