Samsung CLP-310N - 3.3.2 Screws used in the printer

Disassembly and Reassembly
Service Manual
3-5
Samsung Electronics
3.3.2 Screws used in the printer
The screws listed in the table below are used in this printer. Please ensure that, when you disassemble the
printer, you keep a note of which screw is used for which part and that, when reassembling the printer, the
correct screws are used in the appropriate places.
Sec_Code Location Description Qty
6001-000130 Main Drive SCREW-MACHINE;BH,+,M3,L6,ZPC(WHT),SWRCH18A,-,- 1
6002-000440 SCREW-TAPPING;PWH,+,-,2,M3,L8,ZPC(BLK),SWRCH18A,- 21
6003-000301 SCREW-TAPTITE;BH,+,-,S,M4,L6,ZPC(WHT),SWRCH18A,- 1
6003-000196 Main Line SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 29
6003-000269 SCREW-TAPTITE;BH,+,-,S,M3,L6,ZPC(WHT),SWRCH18A,- 8
6003-000301 SCREW-TAPTITE;BH,+,-,S,M4,L6,ZPC(WHT),SWRCH18A,- 1
6001-000485 Toner Y SCREW-MACHINE;PH,+,-,M2.6,L4,ZPC(WHT),SWRCH18A,FP,- 1
6002-000308 SCREW-TAPTITE;PH,+,-,B,M2.6,L6,ZPC(WHT),SWRCH18A,- 7
6001-000485 Toner M SCREW-MACHINE;PH,+,-,M2.6,L4,ZPC(WHT),SWRCH18A,FP,- 1
6002-000308 SCREW-TAPTITE;PH,+,-,B,M2.6,L6,ZPC(WHT),SWRCH18A,- 7
6001-000485 Toner C SCREW-MACHINE;PH,+,-,M2.6,L4,ZPC(WHT),SWRCH18A,FP,- 1
6002-000308 SCREW-TAPTITE;PH,+,-,B,M2.6,L6,ZPC(WHT),SWRCH18A,- 7
6001-000485 Toner K SCREW-MACHINE;PH,+,-,M2.6,L4,ZPC(WHT),SWRCH18A,FP,- 1
6002-000308 SCREW-TAPTITE;PH,+,-,B,M2.6,L6,ZPC(WHT),SWRCH18A,- 7
6003-000196 Front Cover SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 4
6003-000196 Fuser SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 7
6003-000261 SCREW-TAPTITE;BH,+,-,B,M3,L6,ZPC(WHT),SWRCH18A,- 2
6003-000282 LSU SCREW-TAPTITE;BH,+,-,B,M3,L8,ZPC(BLK),SWRCH18A,- 8
6003-000282 LSU LD SCREW-TAPTITE;BH,+,-,B,M3,L8,ZPC(BLK),SWRCH18A,- 2
6003-000282 Imaging unit SCREW-TAPTITE;BH,+,-,B,M3,L8,ZPC(BLK),SWRCH18A,- 10
6003-000282 Cartridge-Transfer SCREW-TAPTITE;BH,+,-,B,M3,L8,ZPC(BLK),SWRCH18A,- 12
6003-000152 Frame SCREW-TAPTITE;PH,+,-,B,M2,L10,ZPC(WHT),SWRCH18A,- 2
6003-000196 SCREW-TAPTITE;PWH,+,B,M3,L10,NI PLT,SWRCH18A 25
6006-001078 SCREW-TAPTITE;PH,+,WSP,B,M3,L10,ZPC(WHT),SWRCH18A,- 1
6002-000440 Rear Cover SCREW-TAPPING;PWH,+,-,2,M3,L8,ZPC(BLK),SWRCH18A,- 2
6003-000261 Top Cover SCREW-TAPTITE;BH,+,-,B,M3,L6,ZPC(WHT),SWRCH18A,- 1