Samsung CLP-770ND - General Printer Disassembly Steps; Cover Unit Removal

Disassembly and Reassembly
Service Manual
3-3
Samsung Electronics
3.3 General Disassembly
3.3.1 Cover Unit
-Before disassembling the cover unit, remove all toner cartridges.
1. Remove 2 screws and MEA COVER-NOISE.
2. Open the front cover. And remove 2 screws.
3. Remove the left/right cover by pushing the hooks
with any sharp tool.
4. Unlatch the 5 hooks from the bottom before
remove the side cover. And remove the right/left
cover.
MEA COVER-NOISEMEA COVER-NOISE
MEA COVER-NOISEMEA COVER-NOISE
MEA COVER-NOISEMEA COVER-NOISE
MEA COVER-NOISEMEA COVER-NOISE