4. Troubleshooting
YES
NO
NO
NO
NO
YES
YES
YES
YES
NO
An “E-06” error code is displayed.
S/W Error
Replace the PCB.
Perform the operation again and
check if it is working properly.
Is the oven in
Bake Toast mode?
Has the switch heater
operated for 20 seconds?
Has the micro-switch
been detected?
After waiting for 20 seconds,
check if the micro-switch has
been detected.
The micro-switch is
defective Replace it.
Connect the
micro-switch properly.
After Power > On,
does the symptom continue?
Is connectivity housing
of the micro-switch normal?
To Next Page
Loading...
