3-3 Operation Guide (CM1929/CM1629/CM1329)
Multi-stage cooking
1. Select the desired power level by pressing the
POWER LEVEL
Selector pad or
DEFROST
pad.
Result
: The selected power level will be displayed in the display window.
2. Set the desired heating time by pressing the
NUMBER
pads.
Result
: The selected time is displayed in the display window.
*The maximum time according to each cooking power level can be referred to in the title “Power Levels ans
Time Variations” . The
NUMBER
pads will not operate or respond when you press a cooking time
exceeding the maximum value. It is not possible to set a cooking time for longer than the maximum time
allowed on the chosen program. It is advisable to press
CANCEL
and to enter a new power level and
cooking time.
3. Repeat steps 1 and 2 for
II
or
III
stage memory programming.
4. Press button:
Result
: The oven lamp and cooling fan will be turned on. The oven will automatically start heating
according to pre-programed cooking time and power level.(I stage II stage III stage).
The time on digital display will count down.
* You can not set up the same
POWER LEVEL
or
DEFROST
.
* It operates as setting up sequence.
To Next Page
Loading...
