3-3 Operation Guide (CM1929/CM1629/CM1329)
How to Operate Memory Cooking
After having finished memory programming, just press the NUMBER pad of the memory number you
want to select. The oven will automatically start heating according to the pre-programmed cooking time
and power level after a short delay (5 sec).
1. Make sure the oven is plugged into a properly earthed electrical outlet and
ON
appears in the
display window.
2. Open the door. The oven lamp will be turned on.
3. Put the food into a suitable container, place it in the centre of the oven and then close the door
securely.
Result
: The oven lamp will go off.
4. Press NUMBER pad.
Result
: After 2 seconds, the selected memory program automatically starts heating.
Stopping the Cooking
You can stop cooking at any time so that you can:
* Check the food
* Turn the food over or stir it
* Leave it to stand
To stop the cooking;
* Temporarily: Open the door or press pad once.
Result
: Cooking stops. To resume cooking, close the door and press again.
* Completely : Press the pad twice.
Result
: The cooking settings are cancelled.
If you want to cancel any cooking settings before starting cooking, simply press CANCEL pad once.
Power Levels and Time Variations (CM1919/1929/CM1619/1629/CM1319/1329)
The power level function enables you to adapt the amount of energy dissipated and thus the time required to
cook or reheat your food, according to its type and quantity. You can choose between the power levels
below.
Power Level
Percentage CM1919/29 Percentage CM1619/29 Percentage CM1319/29
HIGH( ) 100% 1850W 100% 1600W 100% 1300W
MEDIUM( ) 70% 1295W 70% 1120W 70% 910W
LOW( ) 50% 925W 50% 800W 50% 650W
HIGH DEFROST( ) 20% 370W 25% 400W 30% 390W
LOW DEFROST( ) 10% 185W 13% 208W 15% 195W
You cannot set the cooking time longer than maximum value allowed to each specific power level. (see below.)
Power Level
Max. Time Power Level Max. Time
HIGH 25 min HIGH DEFROST 50 min
MEDIUM 40 min LOW DEFROST 50 min
LOW 40 min