Samsung Continuum SCH-I400 - Page 97

97
Scanning and Connecting to a Wi-Fi Network
When you turn on Wi-Fi, your phone searches for available Wi-Fi
connections, then displays them on screen.
1. From the Home screen, sweep your finger downward to
display the Notification Panel.
2. Touch Wi-Fi to turn Wi-Fi On.
3. When your phone completes a scan, touch a Wi-Fi network
to connect. If the Wi-Fi network is open, you will be
automatically connected. If the Wi-Fi network is secured,
enter the password at the prompt to connect.
Adding a Wi-Fi Network Manually
1. From the Home screen, touch Menu ➔ Settings ➔
Wireless & networks ➔ Wi-Fi settings .
2. Touch Wi-Fi to turn Wi-Fi On.
3. Touch Add Network , then enter information about the
network:
• Network Name (SSID) : Enter the name of the Wi-Fi Wireless
Access Point.
• Security : Select the type of security used by the WAP.
• Password or Key : If the WAP is secured, enter the password or hex
key.
4. Touch Connect to connect to the network, or Save to save
the settings.