Alignment & Adjustment
3-12 Samsung Electronics
3-4 Service Adjustment
3-4-1 Adjusting the Picture Size
■ Since the KS7C chassis has the deflection settings data within the Factory Data, the picture size has to be adjusted when
replacing the Main Board or the VCTi Module, according to the following procedures.
① Display the Lion pattern. ② Press "Power Off →Info → Menu → Mute → Power On"
using the remote control and enter Factory Mode.
③ Enter Deflection Mode. ④ Adjust the V-AMP, V-SHIFT, H-AMP and H-SHIFT items so
that the width becomes 5 and the height becomes 4.
To Next Page
Loading...
