Disassembly & Reassembly
12-2 Samsung Electronics
Part Name Description Description Photo
Chassis
Holder
① Separate the Ass'y Holder chassis from the Front Cabinet.
② Pull the Chassis "Stopper-pcb" gently from left to right
Notice: Pulling the Chassis Holder by force may damage
"Stopper-pcb".
① Separate the Speakers, the Side AV wire and S-VHS wire,
TBC wire from the Front Cabinet and the Main Board
Notice: Since there is a clip to connect the Connector Header
in the Wire Connector, pulling it by force may damage the clip
or the connector. Press the clip down completely and pull the
connector.
① Separate the D-Coil and power cable and the remote control
sensor cable from the Main Board.
② To separate the Wire, Fixing clip and pressing the Wire.
① Separate the CRT Ass'y from the CRT.
② Separate the TBC wire, GND, VM cables from the CRT Ass'y
sequentially.
12-1-2 Disassembling the CRT and Chassis
To Next Page
Loading...
