Samsung CS3339Z4C - Page 12

Alignment and Adjustments
4-6 Samsung Electronics
4-2-4 (C) TTX MICOM (SPM-197EP/EPR/EA) OPTION TABLE (FOR MIDDLE EAST)
BYTE
B
Y
T
E
0
B
Y
T
E
1
BIT
D7
D6
D5
D4
D3
D2
D1
D0
D7
D6
D5
D4
D3
D2
D1
D0
LOW (0)
16:9 not functional during zoom
(NORMAL-ZOOM)
CH Up/down functional in the A/V
mode (SCART Jack)
SOUND-I SYSTEM USED
HIGH (1)
16:9 functional during zoom
(NORMAL-ZOOM-16:9)
CH Up/down not functional in the
A/V mode (RCA Jack)
SOUND-I SYSTEM NOT USED
TDA8374A
NOT USED
NOT USED
NOT USED
TDA8842
Existing Sharpness level (when
using the TDA6108 RGB AMP)
No Auto Power On
NTSC : 25KHz (NTSC TABLE)
PAL : 50KHz (PAL TABLE
Sharpness level up (when using the
TDA6107Q RGB AMP)
Auto Power On
NTSC : 25KHz (NTSC TABLE)
PAL : 27KHz (PAL TABLE
Application MICOM
ALL (FIX : LOW)
EP is an OPTION during A/V
(BASIC : LOW)
ALL (FIX : LOW)
ALL
ALL
EP VERSION : TDA8374A ONLY
ALL (FIX : LOW)
ALL (BASIC : HIGH)
ALL (BASIC : HIGH)
ALL (RF VOL. CURVE)
BASIC : LOW
(AV VOL. CURVE : PAL CURVE)
Sound system during the auto
search (All should be set for the
system which is selected during
the Factory Reset.)
Note : A single sound in the Byte
0 is unavailable
COLOR SYSTEMD2
0
0
D1
0
1
10
11
SOUND SYSTEM
CK : AUTO (No OSD)
CW : -. RF : AUTO→PAL →SECAM→NT4.43
-. A/V : AUTO→PAL→SECAM →NT4.43 →NT3.58
CB : -RF : PAL ONLY (No OSD)
-A/V : AUTO→PAL →NT4.43→NT3.58
CS : - RF : AUTO→PAL →SECAM →NT4.43→NT 3.58
-A/V : AUTO→PAL →SECAM →NT4.43 →NT3.58
(?)→B/G→D/K →
(?)→B/G→D/K → I→
B/G ONLY ( No OSD)
(?)→B/G→D/K → I→
NT → M →
● OSD Language by MiCOM
1. Persian (for Iran) : English/Persian (Iranian)
2. Arab (Middle East, Africa) : English/French/Arabian
● Function Required : 1. PICTURE OFF (after 15 minutes) during no signal 2. AUDIO MUTE (during no signal)
3. No BLUE SCREEN 4. No TIMER (CLOCK ON/OFF)
SYSTEMD1
0
0
D0
0
1
10
11
B/G
D/K
I
?(B/G & D/K OR M) /EP VER. : M