Samsung CS3339Z4C - Ttx Micom

4-2-4 (B) TTX MICOM (SPM-197EE/ER/EG) OPTION TABLE (FOR EUROPE)
Alignment and Adjustments
Samsung Electronics 4-5
BYTE
B
Y
T
E
0
B
Y
T
E
1
BIT
D7
D6
D5
D4
D3
D2
D1
D0
D7
D6
D5
D4
D3
D2
D1
D0
LOW (0)
3 BAND
16:9 not functional during zoom in
the A/V mode (NORMAL-ZOOM)
LED RED AT STAND-BY
CH Up/down functional in the A/V
mode (SCART Jack)
P-STD MAX
HIGH (1)
UHF ONLY
16:9 functional during zoom in the
A/V mode (NORMAL-ZOOM-16:9)
LED GREEN AT STAND-BY (POLAND)
CH Up/down not functional in the
A/V mode (RCA Jack)
P-STD NORMAL
TDA8374A
NOT USED
NOT USED (FIX : LOW)
TDA8842
B/G SOUND
D/K SOUND
Western OSD
:English/German/French/Dutch/
Italian/Spanish/Swedish
Existing sharpness level
(when using TDA6108 RGB AMP)
No Auto Power On
NTSC : 25KHz (NTSC TABLE)
PAL : 50KHz (PAL TABLE)
Eastern OSD
:English/Croatian/Rumanian/
Hungarian/Hungarian/Polish/Czech
Sharpness level up
(when using TDA6107Q AMP)
Auto Power On
NTSC : 25KHz (NTSC TABLE)
PAL : 27KHz (PAL TABLE)
Application MICOM
ALL
ALL (BASIC : LOW)
ALL (J900 DELETE AT H)
ALL
ALL (BASIC : HIGH)
ALL
ALL
ALL (FIX : LOW)
SPM- 197EE ONLY used
* SPM-197ER : English/Russian/
Bulgarian
*SPM-197EG: English/Greek/
Yugosiavian
ALL (BASIC : HIGH)
ALL (BASIC : HIGH)
ALL (RF VOL. CURVE)
BASIC : LOW
(AV VOL. CURVE : PAL CURVE)
Sound system during the auto
search (All should be set for the
system which is selected during
the Factory Reset.)
Note : Available when the sound
is B/G ↔ D/K in the Byte 0
SOUND SYSTEMD2
0
0
D1
0
1
10
11
COLOR SYSTEM
B/G ↔ D/K : CK MODEL
I ONLY (NO OSD) : CI, CII MODEL
B/G ONLY (NO OSD) : CB, CX MODEL
NOT USED
AUTO
(NO OSD)
● P-STD Classification (CON./BRI./SHRP.COL.)
● Function Required : 1. PICTURE OFF (after 15 minutes) during no signal 2. AUDIO MUTE (during no signal)
3. No BLUE SCREEN 4. NO TIMER (CLOCK ON/OFF)
STANDARD MODE
D3 BIT
0
1
100/50/50/50
90/50/50/50
DYAMIC MODE
100/50/75/50
100/50/50/50
MOVIE MODE
90/50/75/50
75/55/50/50
MILD MODE
60/50/75/50
60/50/50/50
CUSTOM MODE
100/50/50/50
90/55/25/50