Samsung CS3339Z4C - Page 16

Alignment and Adjustments
4-10 Samsung Electronics
4-2-4 (G) TTX MICOM (SZM-193EVR) OPTION TABLE (FOR ASIA)
BYTE
B
Y
T
E
0
B
Y
T
E
1
BIT
D7
D6
D5
D4
D3
D2
D1
D0
D7
D6
D5
D4
D3
D2
D1
D0
LOW (0)
LINE STEREO OFF
16:9 not function during zoom in the
A/V mode (Normal-ZOOM)
CHILD LOCK OFF
CH Up/down functional in the A/V
mode (SCART Jack)
SOUND-I SYSTEM USED
HIGH (1)
LINE STEREO ON
16:9 functional during zoom in the
A/V mode (NORMAL-ZOOM-16:9)
CHILD LOCK ON
CH Up/down not functional in the
A/V mode (RCA Jack)
SOUND-I SYSTEM NOT USED
TDA8374A
TDA8842
AFT ON (always)
CLOCK DISPLAY
OFF
No Auto Power On
NTSC : 25KHz(NTSC TABLE)
PAL : 50 KHz (PAL TABLE)
AFT OFF (after fine tuning)
CLOCK DISPLAY
ON
Auto Power On
NTSC : 25KHz (NTSC TABLE)
PAL : 27KHz (NTSC TABLE)
Application MICOM
BASIC : LOW
BASIC : HIGH
IC201 (ONE-CHIP) OPTION
Language option
BASIC : LOW(India : HIGH)
BASIC : LOW
Indonesia : HIGH
BASIC : HIGH
ALL (RF VOL.: HIGH)
BASIC : LOW
(AV VOL. CURVE : PAL CURVE)
Initial sound system during the
auto search (All should be set for
the system which is selected dur-
ing the Factory Reset.)
Note : Unavailable during the CB
model in the Byte 0
COLOR SYSTEMD2
0
0
D1
0
1
10
11
SOUND SYSTEM
CK : AUTO (No OSD)
CW : -. RF : AUTO→PAL →SECAM→NT4.43
-. A/V : AUTO→PAL→SECAM →NT4.43 →NT3.58
CB : -RF : PAL ONLY
-A/V : AUTO→PAL →NT4.43→NT3.58
CS : - RF : AUTO→PAL →SECAM →NT4.43→NT 3.58
-A/V : AUTO→PAL →SECAM →NT4.43 →NT3.58
B/G→D/K
B/G→D/K → I
B/G ONLY ( No OSD)
B/G→D/K → I→
NT → M →
● Function Required : 1. PICTURE OFF (after 15 minutes) during no signal 2. AUDIO MUTE during no signal
3. BLUE SCREEN On/off 4. TIMER CLOCK ON/OFF
SYSTEM
D1
0
0
D0
0
1
10
11
B/G
D/K
I
NT-M
OSD Language
D7
0
0
D6
0
1
10
11
English ONLY
English/Indonesian/Malay/Thai/Vietnamese
English/Vietnamese/Indonesian
English/Thai/Malay