What to do if I forgot my Samsung Wireless Router password?
If you forgot your Samsung Wireless Router password, you must reset the router. This will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds.
General| Model | CY-SWR1100 |
|---|---|
| Category | Wireless Router |
| Security | WEP, WPA, WPA2 |
| Wireless Standards | 802.11b/g/n |
| Frequency Bands | 2.4 GHz |
| Ports | 1 x 10/100 Mbps WAN, 4 x 10/100 Mbps LAN |
| Antenna | 2 x External |
Describes risks of electric shock and important instructions.
Explains default IP, username, password, and browser access.
Guides user through setting an admin password.
Configuration details for Dynamic IP and PPPoE connections.
Configuration details for PPTP and L2TP connections.
Details for entering Static IP information.
Final step of the wizard to save configurations.
Details for entering Static IP information.
Details for entering Dynamic IP information.
Details for entering PPPoE username and password.
Details for entering PPTP username and password.
Details for entering L2TP username and password.
Guides through SSID and security setup.
Wizard for connecting WPS-enabled devices.
Enabling, disabling, and managing WPS.
Details on cipher type, PSK/EAP.
Prioritizing network traffic for better performance.
Firewall protection and DMZ settings.
Configuring a static IPv6 connection.
Setting up PPPoE for IPv6.
Configuring firewall rules for IPv6.
Managing admin access and remote settings.
Procedures for updating firmware.
Connecting TVs via USB and prioritizing traffic.
Detailed steps for setting up Priority QoS.
Detailed steps for configuring WPS in Windows 7.
Solutions for common issues like Web UI access and forgotten passwords.
To Next Page
