12_ setting up
CAUTION
There is a possibility of the handle detachment when excessive force is applied to the
handle during relocation of the refrigerator, so do not grab the handle.
setting up your refrigerator
INSTALLING AND DISASSEMBLING THE DOOR HANDLE
Installing the Door Handle
1. Match the Handle Locking Tabs installed on the left hand side of the door and the
handle inserts.
2. Fix the handle by pulling it down or tapping it lightly with a tool like a rubber
hammer.
3. Check whether the locking tabs inside the handle are assembled by pulling it up
and down.
Disassembling the Door Handle
1. Separate the locking tabs by tapping the lower part of the handle with a tool like a
rubber hammer.
2. Pull the handle up to detach the locking tabs from the handle inserts and separate
each other.
To Next Page
Loading...
Need help?
General
