Clone Product
HOME → Clone Product → ENTER E
Clone Product
-
The displayed image may differ depending on the model.
Export the product settings to a USB device or load the settings via a USB device.
This option is useful when assigning the same settings to several products.
When USB does not contain a duplicate le
1
Connect the USB device to a USB port. Run the Clone Product function.
2
The No cloning file found on the USB device. Copy system settings from this product to the USB storage device?
message appears.
When USB contains a duplicate le
1
Connect the USB device to a USB port. Run the Clone Product function.
2
The Cloning file found. Please select an option. message appears.
Run the Clone from USB or Clone to USB function.
-
Clone from USB: Apply the USB device settings to the product.
-
Clone to USB: Copy the product settings to the USB device.
―
After configuration is complete, the product is rebooted automatically.
To Next Page
Loading...
