50
Changing the Input source
Source
Using the remote control
•
SOURCE
→
Source
Using touchscreen control mode
•
Administrator menu
→
Source
→
Source
Source
HDMI
PC
----
Screen Mirroring
To see available options, tap Options at the top right corner of the screen.
Options
-
The displayed image may differ depending on the model.
Source allows you to select a variety of sources and change source device names.
You can display the screen of a source device connected to the product. Select a source from source list to display the screen
of the selected source.
―
If using the remote control, connect an external device and press SOURCE on the remote control to select the device.
―
If using touchscreen control mode, connect an external device. Next, touch and hold on the screen when the product is
turned on to display the administrator menu. Select Source
from the administrator menu.
―
The screen may not display correctly if an incorrect source is selected for the source device you want to convert to.
―
On the Source screen, press TOOLS on the remote control. Alternatively, tap Options at the top right of the screen.
Detailed information on the connected external device is displayed.
Edit Name
Using the remote control
•
SOURCE
→
Source
→
TOOLS
→
Edit Name
→
ENTER
E
Using touchscreen control mode
•
Administrator menu
→
Source
→
Source
→
Options
→
Edit Name
Sometimes the screen will not display properly unless the name of a source device is specified in Edit Name.
In addition, it is best to rename the source device in Edit Name to obtain optimal picture quality.
―
The list can include the following source devices. Source devices on the list differ depending on the selected source.
PC / Cable STB / Satellite STB / PVR STB / Game / Blu-ray / DVD / VCR / AV Receiver / Camcorder / DVI PC /
DVI Devices / TV / IPTV / HD DVD / DMA
―
Available settings in the Picture menu depend on the current source and settings made in Edit Name.
•
When connecting a PC to the HDMI terminal, set Edit Name to PC. In other cases, set Edit Name to AV devices.
•
When connecting a PC to the HDMI IN(DVI) port with HDMI cable, you should set the product to PC mode under Edit
Name.
•
When connecting a PC to the HDMI IN(DVI) port with HDMI to DVI cable, you should set the product to DVI PC mode
under Edit Name.
•
When connecting an AV devices to the HDMI IN(DVI) port with HDMI to DVI cable, you should set the product to DVI
Devices mode under Edit Name.
To Next Page
Loading...