TAKING PICTURES
Now let’s take a picture
3
Select the desired image quality and file size on Record menu under Record mode ( ).
This can be selected by pressing the MENU/ENTER button.
1
To switch on the POWER switch ( )
After the power is turned on you will hear one beep sound and then you will hear one more
beep sound after the camera is ready
2
Turn the mode dial to the RECORD mode ( ) and select the desired mode ( Marco or
Normal ) according to the object distance. To check the macro status, please ensure the
macro ( ) button has been pressed. This is located on the top of the camera. Check if the
( ) icon is seen on LCD panel. If not, press the macro button again.
Macro ( ) : between 0.2m ~ 0.6m
Normal : between 0.6m ~ infinity
Note
You must select the appropriate shooting mode (macro or normal), depending on the
camera/subject distance.
To Next Page
Loading...
