Samsung DIGIMAX 401 - Setting up the application software

77
Setting up the application software
To use this camera with a PC, install the application software first. After this has been done, the
stored images in the camera can be moved to the PC and can be edited by an image editing
program.
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
Close other programs before installing the application software.
Before installing the application software, disconnect the USB connection.
INFORMATION
1. Click the [Install] menu in the Autorun
frame. The Digimax 401 camera driver is
installed automatically.
2. Installation is complete. A window for
which you can select application software
will be displayed. Select the application
program and click the [Install] button.
Refer to page.76 for more information
about the application program.
[Click!]
[Click!]
If you select [Cancel] at the step 2, the application program installation will be
cancelled.
INFORMATION