《61》
Setting up the application software
4. Turn the camera power on. The [Found
New Hardware Wizard] will open and the
computer will recognise the camera.
※If your OS is Windows XP, an image
viewer program will open.
If the download window of the Digimax
Master software opens after starting
Digimax Master, the camera driver was
set up successfully.
3. After restarting the computer, connect the camera to your PC with the USB cable.
● If you have installed the camera driver, The [Found New Hardware Wizard]
may not open.
● On a Windows 98 or 98 SE system, the Found New Hardware Wizard
dialog box opens and a window asking you to select a driver file may
appear. In this case, specify "USB Driver" in the CD supplied. (for Windows
98 and 98 SE).
INFORMATION
To Next Page
Loading...
