45
Ⅳ.ADJUSTMENT
5) Full Version of Firmware2
How to use the FULL firmware2
Depending on the camera status, do the full version upgrade.
▷ Reference:
- Delete all data in the memory card and upgrade with this firmware.
- When using the full version upgrade, back up the script file as the files will be deleted by the upgrade.
- If the full version upgrade is done by the following way, the script files are saved on the SD card. To upload the
script files, do not remove the SD card and refer to instructions listed below.
- If there are LSCLUT0.BIN, DefectivePixel0.bin, DefectivePixel1.bin files on the SD card, the back up was
complete.
1. Insert the SD card that has the Full version of firmware.
2. Use the AC adaptor or fully charged battery.
To upgrade the Firmware, all of the battery level indicator on the LCD
monitor must be displayed.
To Next Page
Loading...
