Samsung DIGIMAX S700 - Display and Printing Setup; On Screen Display and PictBridge Connection

50
Ⅳ.ADJUSTMENT
2. Equipment
▶Equipments
- AE TESTER : AE TESET can test up to LV 16.7.
- POWER SUPPLY : 3.3V / 2A
▶ Chart
- Focus chart
- Gray Chart(36%..Reflection Paper)
3. Adjustment program file
To adjust all items, all kinds of code by items have to be inserted in program file and saved them to the SD card
as TXT file type. The codes are listed below.
3. Basic Information of Adjustment
1. To adjust the camera after changing the electronic parts, see the below table.
FIRMWARE UPGRADE ●●
PUNT ADJ 6 ●●
CCD DEFECT CELL 2 ●●●
SHUTTER CLOSE TIME ADJ 7 ●●●
BACK LASH ADJ 9 ●●●
FLASH ADJ 13 ●●
BATTERY LEVEL ADJ 17 ●●
OB SETTING 18 ●●
BURNING TEST 10 ●●● ●
EEPROM READ 16
EEPROM WRITE 17
MAIN
PCB
POWER
PCB
BARREL
ASSY
CCD
ASSY
PROCESS
CODE