Samsung DIGIMAX S700 - Important Notes on Camera Handling; Environmental and Maintenance Precautions

60
Ⅳ.ADJUSTMENT
5) SHUTTER CLOSE TIME ADJ
After changing the MAIN PCB, BARREL and CCD, adjust the SHUTTER CLOSE TIME.
Required Equipment: AE TESTER(LV 15.8±0.1.)
< How to adjust >
a...Prepare AE TESTER that can be test up to LV 15.8±0.1.
b...Attach the camera to the AE TESTER.
c...Set the LV to 15.8±0.1.
d...Download the program and save it to SD memory card
e...Insert the SD memory card that has the program file and
turn on the camera.
f...Theadjustmentwillbedone
automatically.
g... After completing the upgrade, the camera is turned off automatically.
If the adjustment is incomplete, <Figure 5-2> will display. In this case, re-try the adjustment process.
<Figure 5-1>
<Figure 5-2>