Shooting options
43
Using the timer
Learn how to set the timer to delay shooting.
apdbNsvS
Press [
3
Shutter] to start the timer.
The AF-assist light/timer lamp blinks. The camera will t
automatically take a photo at the specified time.
The front display will start the countdown a few seconds t
before shooting.
Press [t
t
] to cancel the timer.
Depending on the selected face detection option, the timer is not t
available or some timer options are not available.
In Shooting mode, press [
1
t
].
Off
Select an option.
2
Option Description
Off: The timer is not active.
10 Sec: Take a photo in 10 seconds.
2 Sec: Take a photo in 2 seconds.
Double: Take a photo in 10 seconds and take another
in 2 seconds.
Jump Shot: Activate the jump shot timer. (p. 44)
The options may differ depending on the shooting mode.
To Next Page
Loading...
