Basic functions
28
Taking photos
Reducing camera shake (DIS)
Reduce camera shake digitally in Shooting mode.
Before correction After correction
1
In Shooting mode, press [ ].
2
Select Shooting → DIS → an option.
Options Description
Off: DIS is deactivated.
On: DIS is activated.
• DIS may not function properly when:
- you move your camera to follow a moving subject
- you use digital zoom
- there is too much camera shake
- the shutter speed is slow (for example, when you capture night
scenes)
- the battery is low
- you take a close-up shot
• If the camera is hit or dropped, the display will be blurry. If this occurs,
turn off the camera, and then turn it on again.
• In some scene modes, the DIS function is unavailable.
To Next Page
Loading...
