Samsung DV400GWHD Series

Questions and Answers

R
robinbakerAug 15, 2025
Why does my Samsung DV400GWHD Dryer show the HE error?
- J
  jacquelineadkinsAug 15, 2025
  The HE error code on your Samsung Dryer indicates an invalid heating temperature during operation. This can be caused by a restricted vent system or a faulty thermistor. Check for vent restrictions and the thermistor resistance.
D
David IbarraAug 18, 2025
What to do if my Samsung DV400GWHD Dryer displays the AE error?
- K
  Kendra CookAug 19, 2025
  The AE error on your Samsung Dryer indicates an electronic control problem, specifically a communication error. You should check the PCB and wire harness. If problems persist, consider replacing the PCB.
J
Joshua PattersonAug 21, 2025
What does 9E1 error mean on my Samsung DV400GWHD and how to fix it?
- V
  Victoria HernandezAug 22, 2025
  The 9E1 error code on your Samsung Dryer indicates an electronic control problem related to an over voltage error. To resolve this, check the PCB and wire harness, inspect the power supply, and if necessary, replace the PCB.
M
Michael HillAug 26, 2025
How to troubleshoot the tE error on a Samsung DV400GWHD?
- C
  Cindy RodriguezAug 26, 2025
  The tE error on your Samsung Dryer means that the thermistor resistance is either very low or very high. You should check for a clogged lint screen, a restricted vent system, and the thermistor resistance itself.
T
Tiffany PadillaAug 28, 2025
What to do if my Samsung DV400GWHD shows a dE error?
- R
  ryan54Aug 28, 2025
  The dE error on your Samsung Dryer indicates that the dryer is running with the door open. Ensure the door is fully closed. Also, check for loose or open wire terminals in the door sense circuit.
M
Michael KirkAug 31, 2025
Why does my Samsung DV400GWHD show the FE error?
- R
  ricky99Aug 31, 2025
  The FE error on your Samsung Dryer indicates an invalid power source frequency. Make sure you are using a regular power source frequency. Also, check the invalid power frequency sense circuit.
K
kimberlyfarrellSep 4, 2025
What does dF mean on my Samsung DV400GWHD?
- B
  brownnicoleSep 4, 2025
  The dF error on your Samsung Dryer indicates an invalid door condition. Check for loose or open wire terminals in the door sense circuit.
M
Mark YoungSep 7, 2025
What does bE2 error mean on my Samsung DV400GWHD?
- K
  Kelly DuarteSep 8, 2025
  The bE2 error on your Samsung Dryer indicates an invalid state of a key. Check the display PCB key circuit for shorts.
H
Hector SchmidtSep 12, 2025
What does EEE mean on my Samsung DV400GWHD?
- J
  Jennifer TurnerSep 12, 2025
  The EEE error on your Samsung Dryer indicates an invalid state of EEPROM communication. Check the PCB with the EEPROM circuit.