Operations
Operations
English56
6. Once your dryer is registered properly, the App will show this message.
“Congratulations! Your dryer has been added to your Smart Home. Please complete
the setup by restarting your dryer.
You may then remotely control your dryer by turning on Smart Control.
* The remote control function is only available with electric dryers.”
7. When the device registration is complete, the dryer icon will appear in the Samsung
Smart Home app.
8. Please complete the setup by restarting your dryer.
9. Press and hold Smart Control (Smart Monitor) on the washer for more than 3 seconds.
The Smart Control (Smart Monitor) indicator
will light up on the dryer.
NOTE
Some options or settings of the dryer may not be available for remote control.
For safety reasons, Smart Control will be disabled if the Child Lock is activated. To use
Smart Control, make sure you deactivate the Child Lock rst.
This product is a smart dryer that supports the Samsung Smart
Home service.
The EZ setup(network setting) takes time depending on your
network condition.
For more information, visit www.samsung.com.
DC68-03381C-15_IB_DV7500K_EN_230705.indd 56DC68-03381C-15_IB_DV7500K_EN_230705.indd 56 2023-06-28 6:14:342023-06-28 6:14:34
To Next Page
Loading...
