CLEANINGN FILTER
Clean the filter before every dryer use
Slide the grid out as shown Clean the lint filter.
Put your moistened fingers at one corner of the filter
and wipe in a sideways motion all the way across to
the other corner.
Do not operate the dryer without the grid in place.
Do not operate the dryer without the filter in place.
Periodically, remove the lint filter (it snaps in and out) and insert the suction hose adapter from your
vacuum cleaner into the opening.
Do the same through the rectangular opening at top or bottom of the door and at the louvers on the
cabinet front.
DRYER EXTERIOR
Wipe off any spills or washing compounds. Wipe or dust with a damp cloth. Try not to strike the surface
with sharp objects.
Dryer control panel and finishes may be damaged by some laundry pre-treatment soil and stain
remover products if such products are sprayed on or have direct contact with the dryer,.
Apply these pre-treatment products away from the dryer. The fabric may then be washed and dried
normally. Damage to your dryer caused by pre-treatment products is not covered by your warranty.
Care and Cleaning
PULL
CLEAN LINT FILTER
AFTER EACH CYCLE
To Next Page
Loading...
