How to fix a Samsung DVD VCR Combo remote control that is not working?
If your Samsung DVD VCR Combo remote control isn't working, try these steps: First, check and replace the batteries. Then, ensure you're within 20 feet of the unit. If problems persist, remove the batteries, press and hold any button(s) for a few minutes to reset the remote's microprocessor, reinstall the batteries, and try again.
Why my Samsung DVD-V6500 DVD VCR Combo disc does not play?
If your Samsung DVD VCR Combo isn't playing a disc, make sure the disc is inserted correctly with the label side facing up. Also, verify the DVD's region code is compatible with your player.
How to reset forgotten password on Samsung DVD VCR Combo?
To reset a forgotten password on your Samsung DVD VCR Combo, start with no disc in the unit. Then, press the / button on the front panel simultaneously for 5 seconds. This will revert all settings, including the password, to factory defaults. Use this method only when absolutely necessary.
How to unblock the screen on a Samsung DVD VCR Combo?
If the screen of your Samsung DVD VCR Combo is blocked, press the / button for more than 5 seconds when there is no disc in the unit. This will revert all settings to the factory defaults.
Why is 5.1 channel sound not working on my Samsung DVD VCR Combo?
If you're not getting 5.1 channel sound from your Samsung DVD VCR Combo, ensure that: 1. The DVD-VCR is connected to a compatible amplifier. 2. The disc is recorded with 5.1 channel sound. Also, check if the disc has the “5.1 ch” mark and if your audio system is properly connected and working. Finally, verify that the Audio Output in the DVD Setup Menu is set to Bitstream.
Why I cannot insert a video cassette into my Samsung DVD-V6500?
If you cannot insert a video cassette into your Samsung DVD VCR Combo, ensure the cassette is oriented with the window side up and the safety tab facing you.
Why was my Samsung DVD VCR Combo timer recording unsuccessful?
If your Samsung DVD VCR Combo timer recording was unsuccessful, double-check the recording start and stop time settings. Also, be aware that a power failure or interruption during timer recording will cancel the recording.
What does the icon on my Samsung DVD-V6500 screen mean?
If you see a specific icon on the screen of your Samsung DVD VCR Combo, it means the current action or feature cannot be completed because: 1. The DVD’s software restricts it. 2. The DVD’s software doesn’t support the feature (e.g., angles). 3. The feature is not available at the moment. 4. You’ve requested a title or chapter number or search time that is out of range.
Why doesn't the disc menu appear on my Samsung DVD-V6500 DVD VCR Combo?
If the Disc Menu doesn’t appear on your Samsung DVD VCR Combo, check if the disc actually has a Menu.
How to remove noise bars or streaks on Samsung DVD VCR Combo playback?
If you observe noise bars or streaks during playback on your Samsung DVD VCR Combo, press the TRK buttons to minimize this effect.
General| Audio formats supported | MP3, WMA |
|---|---|
| Video formats supported | MPEG4 |
| I/O ports | Antenna in Audio L/R out 2x SCART Composite out RF in/out |
| Zoom capability | Yes |
| Dimensions (WxDxH) | 430 x 290 x 85 mm |
| Digital audio coaxial out | 1 |
| Device type | DVD player |
| Product color | Silver |
| Disc types supported | DVD+RW, DVD-R, DVD-RW |
| Number of optical discs | 1 discs |
To Next Page
