How to reset a forgotten password on Samsung DVD-V8500 DVD VCR Combo?
If you've forgotten the password for your Samsung DVD VCR Combo, press the œœ ?? buttons simultaneously for more than 5 seconds with no disc in the unit. Note that all settings, including the password, will revert to factory settings. Use this method only when absolutely necessary.
What to do if my Samsung DVD-V8500 disc does not play?
If your Samsung DVD VCR Combo disc isn't playing, make sure the disc is installed with the label side facing up and verify the DVD's region number is compatible.
Why is there no audio from my Samsung DVD-V8500 DVD VCR Combo?
If you're experiencing no audio with your Samsung DVD VCR Combo, ensure you've selected the correct Digital Output in the Audio Options Menu.
Why is 5.1 channel sound not working on my Samsung DVD-V8500?
5.1 channel sound will only work on your Samsung DVD VCR Combo if: * The DVD-VCR is connected to the proper Amplifier. * The disc is recorded with 5.1 channel sound. Also, check the disc for the '5.1 ch' mark, ensure your audio system is properly connected and working, and verify that the Audio Output is set to Bitstream in the DVD Setup Menu.
What does it mean when an icon appears on my Samsung DVD-V8500 DVD VCR Combo screen?
When an icon appears on the screen of your Samsung DVD VCR Combo, it means the current feature or action cannot be completed. This could be due to restrictions in the DVD's software, lack of support for the feature, the feature being unavailable at the moment, or requesting a title, chapter, or search time that is out of range.
Why was my Samsung DVD-V8500 DVD VCR Combo timer recording unsuccessful?
If your timer recording on the Samsung DVD VCR Combo was unsuccessful, re-check the recording start and stop time settings. Also, if there was a power failure or interruption during the timer recording, the recording will have been cancelled.
What to do if disc menu doesn't appear on Samsung DVD-V8500?
If the Disc Menu doesn’t appear on your Samsung DVD VCR Combo, check if the disc actually has a Menu.
Why does play mode differ from setup menu selection on Samsung DVD VCR Combo?
If the play mode on your Samsung DVD VCR Combo differs from the Setup Menu selection, some of the functions selected in the Setup Menu may not work properly if the disc is not encoded with the corresponding function.
How to unblock the screen on Samsung DVD VCR Combo?
If your Samsung DVD VCR Combo is blocking the screen, simultaneously press the œœ ?? buttons for more than 5 seconds while there is no disc in the unit. This will revert all settings to the factory defaults.
Why is the picture distorted on my Samsung DVD-V8500 DVD VCR Combo?
If the playback picture on your Samsung DVD VCR Combo is distorted, check to see if you are using a prerecorded tape.
Lists essential safety precautions for operating the appliance.
Identifies and describes buttons, connectors, and indicators on the front panel.
Details the various input and output connections on the rear of the unit.
Steps for playing, navigating, searching, skipping, and using disc/function menus.
Setting cassette type, auto play/repeat, tape counter, and timer recordings.
Basic recording, special features, one-touch recording, and recording speed selection.
A guide to solving common problems encountered with the DVD-VCR.
General| Type | DVD VCR Combo |
|---|---|
| DVD Playback | Yes |
| VCR Playback | Yes |
| Video Output | Composite, S-Video, Component |
| Audio Output | Stereo |
| Remote Control | Yes |
| DVD Player | Yes |
| VCR | Yes |
| Progressive Scan | No |
| Component Video Output | Yes |
| S-Video Output | Yes |
| Playable Disk Types | DVD-Video, DVD-R, DVD-RW, CD, CD-R, CD-RW |
| Playable File Formats | JPEG |
To Next Page
