Samsung DVE52A5500 Series

Questions and Answers

P
Paige HarrisSep 4, 2025
What does code tC mean on a Samsung DVE52A5500?
- S
  Sandra MartinezSep 4, 2025
  The tC code on your Samsung dryer indicates that the Thermistor1 resistance is very low or high. Check for a clogged lint screen and if the vent system is restricted. If this information code remains, contact a Samsung service center.
K
Kristin Leonard MDSep 18, 2025
What does code 3C mean on a Samsung DVE52A5500 Dryer?
- R
  rasmussendavidSep 18, 2025
  The 3C code on your Samsung dryer indicates that the PBA needs to be checked. Unplug the power plug and contact a Samsung service center.
B
Brandy CooperSep 16, 2025
Why is sprayed water not visible during STEAM CARE in my Samsung DVE52A5500 Dryer?
- S
  sarah13Sep 16, 2025
  Sprayed water is difficult to see when the door is closed during STEAM CARE in your Samsung Dryer.
J
Jon BarajasSep 14, 2025
Why does water drip from the nozzle when STEAM CARE starts on my Samsung DVE52A5500?
- D
  David GardnerSep 14, 2025
  When water drips from the nozzle when STEAM CARE starts on your Samsung Dryer, this is steam condensation. The dripping water will stop after a short time.
J
Joshua KirbySep 12, 2025
What does code dF mean on a Samsung Dryer?
- D
  Derek LoweSep 12, 2025
  The dF code on your Samsung dryer indicates an incorrect door switch. Contact a Samsung service center.
L
Linda ThomasSep 12, 2025
What does code AC mean on a Samsung DVE52A5500 Dryer?
- J
  Justin MillerSep 12, 2025
  The AC code on your Samsung dryer indicates an electronic control problem (Invalid Communication). Contact a Samsung service center.
C
Christina WoodsSep 9, 2025
What to do if I see code FC on my Samsung DVE52A5500 Dryer?
- B
  Bridget McguireSep 9, 2025
  The FC code on your Samsung dryer indicates an invalid power source frequency. Try restarting the cycle. If this information code remains, contact a Samsung service center.
J
Jesse ArellanoSep 7, 2025
Why does my Samsung DVE52A5500 Dryer show code 9C1?
- M
  Mary DeanSep 7, 2025
  The 9C1 code on your Samsung dryer indicates that the electronic control needs to be checked. Verify the power cord is connected properly and that the electrical outlet is working. If the information code remains, contact a Samsung service center.
X
xjohnsonSep 5, 2025
What does code tC5 mean on a Samsung Dryer?
- D
  daltonsherrySep 6, 2025
  The tC5 code on your Samsung dryer means the Thermistor2 resistance is very low or high. Check for a clogged lint screen. Also, check if the vent system is restricted. If this information code remains, contact a Samsung service center.
B
Brianna HallAug 21, 2025
Why is my Samsung DVE52A5500 Dryer not running?
- A
  Amanda SimmonsAug 21, 2025
  If your Samsung dryer isn't running, try the following: * Ensure the door is fully latched. * Confirm the power cord is properly plugged into a working electrical outlet. * Check the circuit breakers or fuses in your home. * If the door was opened during a cycle, press Start/Pause again. * Clean the lint filter.