This document is a user manual for a Samsung dryer, model DVE(G)52M775**. It provides comprehensive information on the installation, operation, maintenance, and troubleshooting of the appliance.
Function Description:
The Samsung dryer is designed to efficiently dry clothes using various cycles and temperature settings. It incorporates sensor drying technology to detect moisture levels and automatically stop when the desired dryness is reached, optimizing energy consumption and preventing over-drying. The dryer also features steam cycles to reduce wrinkles and odors, enhancing fabric care.
Important Technical Specifications:
The dryer is a front-loading model, DVE(G)52M775**.
Dimensions:
- Height (Product): 46.0 inches (116.8 cm)
- Height (Required for Installation): 48.0 inches
- Width (Product): 27.0 inches (68.6 cm)
- Width (Required for Installation): 29.0 inches
- Depth (Product): 30.0 inches (76.3 cm)
- Depth (Required for Installation): 35.0 inches
- Depth with door open 90° (Product): 49.80 inches (126.5 cm)
- Depth with door open 90° (Required for Installation): 54.82 inches
- Width with door open 130° (Product): 46.47 inches (118.0 cm)
- Width with door open 130° (Required for Installation): 51.47 inches
Water Pressure: 20-116 psi (137-800 kPa)
NET Weight:
- Electric: 127.9 lb (58 kg)
- Gas: 130.1 lb (59 kg)
Heater Rating:
- Electric: 5300 W
- Gas: 22000 BTU/hr
Installation requirements include a grounded electrical outlet, a power cord for electric dryers (sold separately in the US, attached in Canada), and gas lines for gas models that meet national and local regulations. An exhaust system made of rigid metal or flexible stiff-walled metal exhaust ducting is required. Minimum clearances for alcove or closet installation are specified: 2” in front, 17” on top, 1” on either side, and 5” in the back. The closet front must have two unobstructed air openings for a combined minimum total area of 72 in² with 3” minimum clearance on the top and bottom. The exhaust duct should be 4 inches (10.2 cm) in diameter, and maximum lengths vary depending on the number of 90° elbows. Static pressure in the exhaust system must not exceed 0.83 inches of water column.
Usage Features:
The dryer features a control panel with a Cycle Selector, Digital Graphic Display, and various option buttons.
Cycles:
- Sensor Dry Cycles: These cycles sense moisture in the load and stop when the selected dryness level is reached.
- NORMAL: For most fabrics, including cottons and linens. Eco Dry is enabled by default.
- HEAVY DUTY: For heavy fabrics like jeans, corduroys, or work clothes, using high heat.
- BEDDING: For bulky items such as blankets, sheets, and comforters.
- PERM PRESS: Automatically dries wrinkle-free cottons, synthetics, knits, and permanent press fabrics.
- DELICATES: For heat-sensitive items at a low drying temperature.
- TOWELS: For bath towels and similar items.
- ACTIVE WEAR: For exercise and outdoor wear; thick fabrics may not dry completely.
- Manual Dry Cycles: Allow manual adjustment of drying time.
- TIME DRY: User-specified drying time in minutes. Eco Dry is enabled by default.
- QUICK DRY: A 30-minute quick drying cycle.
- AIR FLUFF: Tumbles the load in room temperature air.
- Steam Cycles: Use steam to reduce wrinkles and odors.
- REFRESH: Smooths wrinkles and reduces odors for 1-4 items with steam and heat.
- WRINKLE AWAY: Reduces wrinkles for 2-3 items with steam; drying time can be extended.
- STEAM SANITIZE: Sanitizes items with steam and high heat, making them soft and reducing smells.
Options and Settings:
- Dry Level: Adjusts dryness for Sensor Dry and Steam Cycles (Very Dry, More Dry, Normal Dry, Less Dry, Damp Dry). Not available for STEAM SANITIZE and ACTIVE WEAR.
- Temp.: Changes drying temperature (High, Medium, Med Low, Low, Extra Low).
- Time: Adjusts drying time for Manual Dry cycles.
- Eco Dry: Reduces power consumption by extending drying time (up to 3 times) for NORMAL and TIME DRY cycles. Enabled by default.
- Mixed Load Bell: Notifies when the load is damp dry (80% dried), allowing removal of quick-drying items. Available for all Sensor Dry cycles except STEAM SANITIZE and ACTIVE WEAR.
- Anti Static: Reduces static electricity by spraying steam. Available for NORMAL, HEAVY DUTY, PERM PRESS, DELICATES, and TIME DRY.
- Wrinkle Prevent: Provides 180 minutes of intermittent tumbling in unheated air to reduce wrinkling.
- My Cycle: Allows users to save and use their preferred cycle settings.
- Adjust Time: Changes set time for Manual Dry cycles and WRINKLE AWAY.
- Sound On/Off: Toggles notification beeps and melodies.
- Child Lock: Disables all buttons except POWER to prevent children from operating the dryer. Activated by pressing and holding Dry Level and Temp. for 3 seconds.
- Drum Light: Turns on the drum light for 5 minutes when Time is pressed and held for 3 seconds.
- Smart Care: Allows users to diagnose dryer issues using a smartphone app by recognizing information codes displayed on the dryer.
Maintenance Features:
- Lint Filter Cleaning: Must be cleaned before or after every load to prevent fire risk and maintain performance.
- Vent Sensor (applicable models only): Detects and notifies when ductwork needs cleaning.
- Level 0 (Off): Ductwork not clogged.
- Level 1 (On): Duct or lint filter clogged, or high pressure due to long/bent duct. Requires checking and cleaning lint filter/duct, and shortening/straightening duct.
- Level 2 (Blinking): Duct or lint filter severely clogged, or very high pressure due to long/bent duct. Requires thorough cleaning and duct adjustment.
- Exhaust System Cleaning: Recommended annually or regularly to maintain optimum performance. External exhaust hood should be cleaned more frequently.
- Dryer Exterior Cleaning: Clean with a soft, damp cloth. Avoid abrasive substances and sharp objects.
- Tumbler Cleaning: Remove stains with an all-purpose cleaner. Tumble old towels to remove residues. For powder coat tumblers, use a damp cloth with a mild, non-abrasive cleaner.
Troubleshooting:
The manual provides a comprehensive troubleshooting guide for common issues such as:
- Dryer not running or not heating.
- Uneven drying or not drying properly.
- Noisy operation.
- Odors.
- Lint on clothes.
- Wrinkled items after Wrinkle Prevent.
- Water dripping from nozzle or not visible during Steam Care.
- Extended drying time.
It also lists information codes (dC, FC, AC, 3C, HC, HC4, tC, tC5, dF) that may appear on the display, along with suggested actions for each. If problems persist, users are advised to contact a local Samsung service center.
Need help?
To Next Page
General